Glass - Top Triple Layer

His triple selective layer acts effectively averting the loss of inner energy to the outside, by what augments the thermal isolation attaining energetic saving.

For the architecture

The SNX 60 mark a new was, treats of a glass highly technician with upper provision. Conceived so much for new work or rehabilitation, by his uniformity of colour and low reflection does not alter the aesthetics of the edifice. Absolute innovation for residential work like houses, schools, hospitals, trades and offices.

Recommendations

Marüpullación And storage of the glass

• The installer has to respect the Norm JOINS 85-222-85 of placing.
• The glasses with camera do not have to store exposed in the sunlight on no account.
• Ensure that where go to lean the glass was a clean and uniform surface.
• The acristalamiento has to rest vertically and always on the inferior brink of the glasses that form it.
• The brinks do not have to go in in contact with the profile neither other hard surfaces during the installation.

Cleansing of the glass

• The regular cleansing of glasses and windows has a direct effect in the durability of the closing.
• Remove immediately all rests of materials of construction, like cement, painting, labels and adhesive.
• Not using abrasive brushes, leaves neither other objects that can rayar the surface.
• Use a clean cloth drenched of water to soften the deposits before cleaning. Never it clean a glass in dry.
• Use limpiacristales suitable following the instructions of the manufacturer. Remove immediately the product of cleansing applied, with a dry cloth, soft and clean. Avert that the cleansing solution or water dry on the surfaces.
• Employ a mix of alcohol and water to the 50 %, or of ammonia and water. To continuation, clear with temperate water. Use a soft and dry cloth to dry the glass.
• The most important operation is to dry the glass entirely after the wash.

 Doubts? We RESOLVE THEM TO him

What is the luminous transmission?
It is the total quantity of visible light that crosses an acristalamiento. It expresses in a percentage of the light incident on the same.

What is the solar factor?
It is the relation among the total quantity of energy that goes in through the glass concerning the incident. It is the sum of the direct solar transmission more the absorbed by the glass and irradiada to the interior.

A glass of drop emisividad provides more freshness in summer and more heat in winter?
A glass of drop emisividad, by himself only, does not provide more heat in winter neither colder in summer. His main function is to prevent that the energy generated in the interior (was cold or heat) escape "" to the outside, achieving of this way reduce the energetic consumption and, therefore, a significant economic saving.

Which advantage contributes the use of glasses of layer?
The glasses of layer allow a better luminous control and energetic, giving like main result comfort and saving of significant way. The glasses of layer divide in glasses of solar control that reflect the solar energy; under emisivos, that reduce the transmission/energetic losses; and glasses of tall provision or selective, that incorporate both functions. To achieve the low effect emisivo, the glasses of layer have to go mounted in double acristalamiento.

It is important the position of the glasses in glasses with camera?
The glasses of layer have to be in contact with the camera of air or argon. In
The cases of glasses of solar control or solar control and under emisivo achieves the maximum performance planting the layer in face 2, that is to say, in the inner face of the external glass. When an acristalamiento with camera spends glasses laminados, can go situated in the external or inner glass, depending of the type of security that look for (against external vandalism or protection of impacts in the interior of the home).

How it affects the thickness of the camera to the thermal isolation?
The thermal transmittance (value Or) has a reverse relation with the thickness. When augmenting this, diminishes the transmission by radiation, by what the value Or diminishes.

When it needs temper a glass?
A glass with tall index of energetic absorption, under solar exposure, can achieve important temperatures. If the warming is not uniform, what occurs generally, the differences in the dilatation can break the glass. The temperate glass admits main thermal differences among near points, by what is a guarantee in front of this phenomenon. This is something that has to contemplate when the absorption surpasses the 40 %.

How it averts the discoloration by the sun?
The glass laminado reduces the step of the ultraviolet rays, causantes of the discoloration in more than the 95 %. If it wants to ensure practically the 100 %, has to use laminado with PVB thicker.

How it calculates the weight of a glass?
The weight of the glass calculates with the following formula: 2,5 kg multiplied by the thickness of the glass and by the m2 of the surface. Example: a glass of 4 mm of thickness, size 2 m x 3 m. Formula: 2,5 x 4 x 6 = 60 kg of weight.